Matting Agent Alternative
ACEMATT® 3600 alternative: Vistamatt VS660
Looking for a Evonik ACEMATT® 3600 alternative? Vistamatt VS660 is matched on particle route and application for waterborne clear wood, backed by TDS/SDS/TSCA documentation and free samples.
Specification comparison
| Property | ACEMATT® 3600 (Evonik) | Vistamatt VS660 |
|---|---|---|
| Chemical basis | Amorphous silica | Synthetic amorphous silica (CAS 7631-86-9) |
| Type | After-treated silica, high efficiency | Synthetic silica matting agent |
| Particle size D50 | ~5.0 µm | 5.0-5.3 µm |
| Recommended dosage | 1.5-4.5% | 2-4% (system-dependent) |
| Applications | high-efficiency matting, clear and waterborne systems, soft-feel | waterborne clear wood |
ACEMATT® 3600 data from public technical datasheets; trademarks belong to Evonik. Comparison for cross-reference only.
Matching conclusion
Both fine, high-efficiency matting agents at a ~5 µm route. VS660 matched for waterborne clear wood with strong transparency on dark substrates.
Vistamatt matches on the particle route and application rather than claiming an identical product. Qualify a replacement by screening VS660 against your current ACEMATT® 3600 control at matched gloss, holding dispersion, film build and cure constant.
Evaluation positioning. Vistamatt VS660 is designed for evaluation in applications currently using ACEMATT® 3600, and offers comparable performance in the application described above when qualified at matched gloss. Published figures indicate a similar performance range based on internal testing; they are not a guarantee of equivalence in your formulation.
Trademark notice. ACEMATT is a trademark of Evonik Industries AG. Vistamatt and Longyan Vista Chemical Co., Ltd. are not affiliated with, endorsed by, or connected to Evonik Industries AG in any way. Competitor grade names are used solely for identification and comparison purposes. Specifications quoted for competitor products are taken from their publicly available technical data sheets and are not independently verified by Vistamatt. This page compares published specifications; it does not report side-by-side performance testing. Suitability must be confirmed by screening in your own system.
Frequently asked questions
Is VS660 a direct replacement for ACEMATT® 3600?
VS660 is matched to ACEMATT® 3600 on particle route and application, not sold as an identical drop-in. Both are amorphous silica matting agents for waterborne clear wood. Qualify by screening VS660 in your own formulation against your current ACEMATT® 3600 control at matched gloss.
How do the particle sizes compare?
ACEMATT® 3600 runs around ~5.0 µm; VS660 is 5.0-5.3 µm (D50). Matching on particle route is the starting point; final selection depends on target gloss, film build and system.
What dosage should I start with?
ACEMATT® 3600 is typically used at 1.5-4.5% on total formulation. VS660 starts at 2-4% for most systems. Confirm by screening at matched gloss, not matched loading.
Can I get a sample to test against ACEMATT® 3600?
Yes. Vistamatt provides free 200-500 g samples (freight prepaid by Vistamatt), shipped with a screening plan matched to your system. Send your resin system, target gloss, application method and film build.
Test VS660 against your ACEMATT® 3600 control
Send your resin system, target gloss, application method and film build. We'll ship a free 200-500 g sample with a screening plan matched to your system.