Matting Agent Alternative
ACEMATT® TS 100 alternative: Vistamatt Vista-171S
Looking for a Evonik ACEMATT® TS 100 alternative? Vistamatt Vista-171S is matched on particle route and application for industrial & metal, solventborne PU, backed by TDS/SDS/TSCA documentation and free samples.
Specification comparison
| Property | ACEMATT® TS 100 (Evonik) | Vistamatt Vista-171S |
|---|---|---|
| Chemical basis | Amorphous silica | Synthetic amorphous silica (CAS 7631-86-9) |
| Type | Untreated fumed/thermal silica | Synthetic silica matting agent |
| Particle size D50 | 8-11 µm | 7.0-7.5 µm |
| Recommended dosage | 1.5-4.5% | 2-4% (system-dependent) |
| Applications | waterborne, solventborne, 2K, wood, leather, plastic | industrial & metal, solventborne PU |
ACEMATT® TS 100 data from public technical datasheets; trademarks belong to Evonik. Comparison for cross-reference only — qualify by screening in your own system.
Matching conclusion
Both untreated-route silicas for high transparency in demanding matte systems. Vista-171S matched on the coarser particle route for industrial and metal coatings.
Vistamatt matches on the particle route and application rather than claiming an identical product. The reliable way to qualify a replacement is to screen Vista-171S against your current ACEMATT® TS 100 control at matched gloss, holding dispersion, film build and cure constant.
Frequently asked questions
Is Vista-171S a direct replacement for ACEMATT® TS 100?
Vista-171S is matched to ACEMATT® TS 100 on particle route and application, not sold as an identical drop-in. Both are amorphous silica matting agents for industrial & metal, solventborne PU. Qualification is done by screening Vista-171S in your own formulation against your current ACEMATT® TS 100 control at matched gloss.
How do the particle sizes compare?
ACEMATT® TS 100 runs around 8-11 µm (D50); Vista-171S is 7.0-7.5 µm. Matching on particle route is the starting point; final selection depends on your target gloss, film build and system.
What dosage should I start with?
ACEMATT® TS 100 is typically used at 1.5-4.5% on total formulation. Vista-171S starts at 2-4% for most systems. Confirm by screening at matched gloss, not matched loading.
Can I get a sample to test against ACEMATT® TS 100?
Yes. Vistamatt provides free 200-500 g samples (freight collect), shipped with a screening plan matched to your system. Send your resin system, target gloss, application method and film build to get a grade and starting dosage.
Test Vista-171S against your ACEMATT® TS 100 control
Send your resin system, target gloss, application method and film build. We'll ship a free 200-500 g sample with a screening plan matched to your system.